Health and Safety at Work Act 2015

40 Duty of PCBU who manufactures plant, substances, or structures

(1)

This section applies to a PCBU (a manufacturer) who conducts a business or undertaking that manufactures—

(a)

plant that is to be used, or that could reasonably be expected to be used, as or at a workplace; or

(b)

a substance that is to be used, or that could reasonably be expected to be used, at a workplace; or

(c)

a structure that is to be used, or that could reasonably be expected to be used, as or at a workplace.

(2)

The manufacturer must, so far as is reasonably practicable, ensure that the plant, substance, or structure is manufactured to be without risks to the health and safety of persons—

(a)

who, at a workplace, use the plant, substance, or structure for a purpose for which it was designed or manufactured; or

(b)

who handle the substance at a workplace; or

(c)

who store the plant or substance at a workplace; or

(d)

who construct the structure at a workplace; or

(e)

who carry out any reasonably foreseeable activity (such as inspection, cleaning, maintenance, or repair) at a workplace in relation to—

(i)

the assembly or use of the plant for a purpose for which it was designed or manufactured, or the proper storage, decommissioning, dismantling, or disposal of the plant; or

(ii)

the use of the substance for a purpose for which it was designed or manufactured, or the proper handling, storage, or disposal of the substance; or

(iii)

the assembly or use of the structure for a purpose for which it was designed or manufactured, or the proper demolition or disposal of the structure; or

(f)

who are at or in the vicinity of a workplace and who are exposed to the plant, substance, or structure at the workplace or whose health or safety may be affected by a use or an activity referred to in any of paragraphs (a) to (e).

(3)

The manufacturer must carry out, or arrange the carrying out of, any calculations, analysis, testing, or examination that may be necessary for the performance of the duty imposed by subsection (2).

(4)

The manufacturer must give to each person to whom the manufacturer provides the plant, substance, or structure adequate information concerning—

(a)

each purpose for which the plant, substance, or structure was designed or manufactured; and

(b)

the results of any calculations, analysis, testing, or examination referred to in subsection (3), including, in relation to a substance, any hazardous properties of the substance identified by testing; and

(c)

any conditions necessary to ensure that the plant, substance, or structure is without risks to health and safety when used for a purpose for which it was designed or manufactured or when carrying out any activity referred to in subsection (2)(a) to (e).

(5)

The manufacturer must, on request, make reasonable efforts to give current relevant information on the matters referred to in subsection (4) to a person who carries out, or is to carry out, any of the activities referred to in subsection (2)(a) to (e).

Compare: Model Work Health and Safety Act (Aust) s 23