Climate Change (Stationary Energy and Industrial Processes) Regulations 2009

  • Warning: Some amendments have not yet been incorporated
  • This version was replaced on 20 June 2017 to make corrections to regulations 3(1), 4(h), (h)(ii)(B), and (h)(iii), 44G, 44I, 44J, 44K, 44L, 44M, 44N, and 44O under section 25(1)(j)(ii) of the Legislation Act 2012 and then to make corrections to regulations 14(2), 23(b), 24(1)(c), 35(1), 44C, 44J(1), 44Q(1), and 50(6), and clauses 5(3) and (7)(2) of Schedule 1 under section 25(1)(k) of the Legislation Act 2012.
35 Method of calculating emissions from producing aluminium

(1)

Emissions in relation to aluminium produced by the person in the year must be calculated in accordance with the following formula:

TE = A + B + C + {D × F × [(G × H) + (I × J)] × 0.001}

where—

A

is the total number of tonnes of carbon dioxide resulting from baked anodes used by the person in the year, as recorded under regulation 34(a)

B

is the total number of tonnes of carbon dioxide resulting from pitch volatiles used by the person in the year, as recorded under regulation 34(b)

C

is the total number of tonnes of carbon dioxide resulting from packing material used by the person in the year, as recorded under regulation 34(c)

D

is the total number of tonnes of hot metal aluminium produced in the year, as recorded under regulation 34(d)

F

is the anode effect minutes per cell-day, as recorded under regulation 34(e)

G

is the slope coefficient for C2F6, as recorded under regulation 34(f)

H

is 12 200 (the global warming potential for C2F6)

I

is the slope coefficient for CF4, as recorded under regulation 34(f)

J

is 7 390 (the global warming potential for CF4)

TE

is the total emissions for the activity of producing aluminium for the year in tonnes.

(2)

If a person who is required to comply with this regulation is required to submit an emissions return for a period other than a year, this regulation applies with any necessary modifications.

Regulation 35(1) formula item H: amended, on 12 December 2013 (applying on and from 1 January 2013), by regulation 10(1) of the Climate Change (Stationary Energy and Industrial Processes) Amendment Regulations 2013 (SR 2013/381).

Regulation 35(1) formula item J: amended, on 4 March 2015 (applying from 31 December 2014), by regulation 5 of the Climate Change (Stationary Energy and Industrial Processes) Amendment Regulations 2014 (LI 2014/365).