Hazardous Substances (Compressed Gases) Amendment Regulations 2012

  • revoked
  • Hazardous Substances (Compressed Gases) Amendment Regulations 2012: revoked, on 1 December 2017, pursuant to regulation 4(1) of the Hazardous Substances (Health and Safety Reform Revocations) Regulations 2017 (LI 2017/233).

Reprint as at 1 December 2017

Coat of Arms of New Zealand

Hazardous Substances (Compressed Gases) Amendment Regulations 2012

(SR 2012/284)

Hazardous Substances (Compressed Gases) Amendment Regulations 2012: revoked, on 1 December 2017, pursuant to regulation 4(1) of the Hazardous Substances (Health and Safety Reform Revocations) Regulations 2017 (LI 2017/233).

Jerry Mateparae, Governor-General

Order in Council

At Wellington this 24th day of September 2012

Present:
The Right Hon John Key presiding in Council

Note

Changes authorised by subpart 2 of Part 2 of the Legislation Act 2012 have been made in this official reprint.

Note 4 at the end of this reprint provides a list of the amendments incorporated.

These regulations are administered by the Ministry for the Environment.

Pursuant to section 140(1) of the Hazardous Substances and New Organisms Act 1996, His Excellency the Governor-General, acting on the advice and with the consent of the Executive Council and on the recommendation of the Minister for the Environment given in accordance with section 141 of that Act, makes the following regulations.

Contents

1Title
2Commencement
3Principal regulations
4Regulation 3 amended (Interpretation)
5New regulation 5A inserted (Application of regulations to UNRTDG cylinders)
5AApplication of regulations to UNRTDG cylinders
6Regulation 7 amended (Reference temperatures)
7Cross-heading above regulation 9 revoked
8Regulation 9 amended (Application of this Part)
9New regulation 9A and cross-heading inserted
9AUse and supply of cylinders
10Regulation 11 amended (Standards for fire extinguishers)
11Regulation 12 amended (Standards for cylinder neck threads)
12New cross-heading above regulation 15 inserted
13Cross-heading above regulation 16 replaced
14Regulation 17 revoked (Repair of cylinders)
15Regulation 18 amended (Restrictions on imported cylinders)
16Regulation 19 amended (Test certificate for imported cylinders)
17Regulation 22 amended (Issue of pre-commissioning certificate)
18New Part 2A inserted
23AApplication of this Part
23BFire extinguisher registration number
23CStandards for low-pressure fire extinguishers
23DManufacture of low-pressure fire extinguishers
23ESavings provision for existing low-pressure fire extinguishers
19Regulation 24 amended (Restrictions on import, manufacture, and supply of aerosols)
20Regulation 27 replaced (Cylinder valves)
27Cylinder valves
21Regulation 28 amended (Outlet connection for cylinder valves)
22Regulation 29 amended (Cylinder valve design for particular gases)
23Regulation 30 amended (Cylinder over-pressure protection for particular gases)
24Regulation 31 amended (Regulators)
25Regulation 32 replaced (LPG regulator or automatic changeover device)
32LPG regulator or LPG automatic changeover device
26Regulation 35 amended (Restrictions on imported LPG fittings)
27Regulation 39 amended (Markings for cylinders and fire extinguishers)
28Regulation 52 amended (Periodic certificate)
29Regulation 55 amended (Periodic testing of LPG valve and pressure relief device)
30Regulation 56 amended (Restrictions on charging cylinders)
31Regulation 59 amended (Restriction on persons able to charge compressed gas containers)
32Regulation 60 amended (Approval of fillers)
33Regulation 61 amended (Maximum filling ratio for cylinders and compressed gas stationary tanks)
34New regulation 61A inserted (Air in self-contained breathing apparatus)
61AAir in self-contained breathing apparatus
35Regulation 62 amended (Charging cylinders and compressed gas stationary tanks with liquid gases)
36Regulation 64 replaced (Developed pressure for permanent gases)
64Developed pressure for permanent gases
37Regulation 66 amended (Refilling cylinder)
38New Part 8A inserted
67ARepair of cylinders
39Regulation 68 amended (Application of this Part)
40Regulation 76 amended (Special register for cylinders)
41Regulation 79 replaced (Removal of existing designs)
79Recalls and design withdrawals
42New Schedule inserted
Explanatory note
Gazette Information
Reprint notes