New Zealand Flag Referendums (First Flag Referendum) Order 2015

Reprint as at 2 October 2015

Coat of Arms of New Zealand

New Zealand Flag Referendums (First Flag Referendum) Order 2015

(LI 2015/206)

Jerry Mateparae, Governor-General

Order in Council

At Wellington this 31st day of August 2015

Present:
His Excellency the Governor-General in Council

Note

Changes authorised by subpart 2 of Part 2 of the Legislation Act 2012 have been made in this official reprint.

Note 4 at the end of this reprint provides a list of the amendments incorporated.

This order is administered by the Ministry of Justice.

Pursuant to sections 11 and 13 of the New Zealand Flag Referendums Act 2015 and section 21(2) of the Referenda (Postal Voting) Act 2000 as applied by section 18(1)(b) of the New Zealand Flag Referendums Act 2015, His Excellency the Governor-General, acting on the advice and with the consent of the Executive Council, makes the following order.

Order

1 Title

This order is the New Zealand Flag Referendums (First Flag Referendum) Order 2015.

2 Commencement

This order comes into force on 1 September 2015.

3 Closing of referendum roll

The date for the closing of the referendum roll for the first flag referendum is Friday 23 October 2015.

4 Close of first flag referendum

The date for the close of the first flag referendum is Friday 11 December 2015.

5 Alternative flag designs

(1)

The images of the 5 alternative flag designs that are to appear on the voting paper for the first flag referendum are the images depicted in Part 1 of the Schedule.

(2)

The official descriptions of the 5 alternative flag designs, to be used for the purposes of dictating the relevant parts of the voting paper under section 24(4)(c) of the New Zealand Flag Referendums Act 2015, are set out in Part 2 of the Schedule.

(3)

The technical specifications of the 5 alternative flag designs are set out in Part 3 of the Schedule.

Clause 5: inserted, on 2 October 2015, by clause 4 of the New Zealand Flag Referendums (First Flag Referendum) Amendment Order 2015 (LI 2015/223).

Schedule Alternative flag designs

cl 5

Schedule: inserted, on 2 October 2015, by clause 5 of the New Zealand Flag Referendums (First Flag Referendum) Amendment Order 2015 (LI 2015/223).

Part 1 Images

Silver fern (black and white)

Silver fern (black and white)

Silver fern (black and white)

Silver fern (red, white, and blue)

Silver fern (red, white, and blue)

Silver fern (red, white, and blue)

Koru

Koru

Koru

Silver fern (black, white, and blue)

Silver fern (black, white, and blue)

Silver fern (black, white, and blue)

Red peak

Red peak

Red peak

Part 2 Official descriptions

Silver fern (black and white)

The dominant feature of this flag is a black and white fern frond. The fern frond sweeps diagonally up from the bottom left corner to the top right corner of the flag. The leaves and the stem on the top side of the fern are black on a white background. The leaves and the stem on the bottom side are white on a black background.

Silver fern (red, white, and blue)

The dominant feature of this flag is a white fern frond that sweeps up diagonally from the bottom left corner to the right of the top centre. The left side of the fern is on a red background. To the right of the fern, there are 4 stars, in the formation of the Southern Cross constellation, on a blue background. Each star is red with a white border and has 5 points.

Koru

The right half of this flag is black. At the halfway point of the flag, the black forms a koru on a white background. The black koru spirals down and to the left from the top of the flag.

Silver fern (black, white, and blue)

The dominant feature of this flag is a white fern frond that sweeps up diagonally from the bottom left corner to the right of the top centre. The left side of the fern is on a black background. To the right of the fern, there are 4 stars, in the formation of the Southern Cross constellation, on a blue background. Each star is red with a white border and has 5 points.

Red peak

In the centre of this flag are two thick white diagonal lines. They start in the left and right bottom corners and meet in the centre top, forming an upside-down V shape. The spaces around the shape form triangles. The triangle in the centre of the shape is red, the triangle to the left of the upside-down V shape is black, and the triangle to the right is blue.

Part 3 Technical specifications

Silver fern (black and white)

The flag proportion is 2:3 and the device on the flag is a stylised fern [A].

The fern device has 29 leaflets. The stem originates at the bottom of the hoist and the final leaflet finishes at the top of the fly.

The leaflets and the stem on the top side of the fern device are black on a white background. The leaflets and the stem on the bottom side of the fern device are white on a black background.

The colours are white (Pantone SAFE) in the areas marked “1” and black (Pantone BLACK) in the areas marked “2”.

Technical diagram showing the measurements required for accurate construction of the silver fern (black and white)

Technical diagram showing the measurements required for accurate construction of the silver fern (black and white)

Silver fern (red, white, and blue)

The flag proportion is 1:2 and the devices on the flag are a stylised fern [A] and the Southern Cross constellation [B].

The fern device is white, has 33 leaflets, and sits within an area measuring eleven-hundred-and-eighty-five by nine-hundred eighteen-hundredths of the hoist of the flag. The background on the top side of the fern device is red. The background on the bottom side of the fern device is blue.

The Southern Cross device sits within an area measuring five-hundred-and-thirty-three by six-hundred-and-ninety-one eighteen-hundredths of the fly of the flag. Each of the 4 red stars in the Southern Cross device has 5 points and a white border.

The colours are white (Pantone SAFE) in the areas marked “1”, red (Pantone 186C) in the areas marked “2”, and blue (Pantone 280C) in the area marked “3”.

Technical diagram showing the measurements required for accurate construction of the silver fern (red, white and blue)

Technical diagram showing the measurements required for accurate construction of the silver fern (red, white and blue)

Koru

The flag proportion is 1:2 and the device on the flag is a stylised koru [A].

The black koru device sits on a white background within an area measuring nine-hundred by nine-hundred eighteen-hundredths of the hoist of the flag.

The colours are white (Pantone SAFE) in the area marked “1” and black (Pantone BLACK) in the area marked “2”.

Technical diagram showing the measurements required for accurate construction of the koru

Technical diagram showing the measurements required for accurate construction of the koru

Silver fern (black, white, and blue)

The flag proportion is 1:2 and the devices on the flag are a stylised fern [A] and the Southern Cross constellation [B].

The fern device is white, has 33 leaflets, and sits within an area measuring eleven-hundred-and-eighty-five by nine-hundred eighteen-hundredths of the hoist of the flag. The background on the top side of the fern device is black. The background on the bottom side of the fern device is blue.

The Southern Cross device sits within an area measuring five-hundred-and-thirty-three by six-hundred-and-ninety-one eighteen-hundredths of the fly of the flag. Each of the 4 red stars in the Southern Cross device has 5 points and a white border.

The colours are white (Pantone SAFE) in the areas marked “1”, red (Pantone 186C) in the area marked “2”, blue (Pantone 286C) in the area marked “3”, and black (Pantone BLACK) in the area marked “4”.

Technical diagram showing the measurements required for accurate construction of the silver fern (black, white and blue)

Technical diagram showing the measurements required for accurate construction of the silver fern (black, white and blue)

Red peak

The flag proportion is 1:2 and the device on the flag is a chevron [A].

The chevron device is white and the width of the line is three hundred-and-twenty eighteen-hundredths of the fly of the flag. The left side originates at the bottom left quarter of the fly, the right side originates at the bottom right quarter of the fly, and the centre point is at the centre top of the fly. The background on the bottom side of the chevron device is red. The background on the left side of the chevron device is black. The background on the right side of the chevron device is blue.

The colours are white (Pantone SAFE) in the area marked “1”, black (Pantone BLACK) in the area marked “2”, red (Pantone 186C) in the area marked “3”, and blue (Pantone 280C) in the area marked “4”.

Technical diagram showing the measurements required for accurate construction of the Red Peak

Technical diagram showing the measurements required for accurate construction of the Red Peak

Michael Webster,
Clerk of the Executive Council.

Issued under the authority of the Legislation Act 2012.

Date of notification in Gazette: 3 September 2015.

Reprints notes
1 General

This is a reprint of the New Zealand Flag Referendums (First Flag Referendum) Order 2015 that incorporates all the amendments to that order as at the date of the last amendment to it.

2 Legal status

Reprints are presumed to correctly state, as at the date of the reprint, the law enacted by the principal enactment and by any amendments to that enactment. Section 18 of the Legislation Act 2012 provides that this reprint, published in electronic form, has the status of an official version under section 17 of that Act. A printed version of the reprint produced directly from this official electronic version also has official status.

3 Editorial and format changes

Editorial and format changes to reprints are made using the powers under sections 24 to 26 of the Legislation Act 2012. See also http://www.pco.parliament.govt.nz/editorial-conventions/.

4 Amendments incorporated in this reprint

New Zealand Flag Referendums (First Flag Referendum) Amendment Order 2015 (LI 2015/223)