Heavy Engineering Research Levy Act Amendment Order 2021

2021/175

Coat of Arms of New Zealand

Heavy Engineering Research Levy Act Amendment Order 2021

Patsy Reddy, Governor-General

Order in Council

At Wellington this 5th day of July 2021

Present:
Her Excellency the Governor-General in Council

This order is made under section 4(4) of the Heavy Engineering Research Levy Act 1978 on the advice and with the consent of the Executive Council.

Order

1 Title

This order is the Heavy Engineering Research Levy Act Amendment Order 2021.

2 Commencement

This order comes into force on 26 August 2021.

3 Principal Act
4 Schedules 2 and 3 replaced

Replace Schedules 2 and 3 with the Schedules 2 and 3 set out in the Schedule of this order.

Schedule Schedules 2 and 3 replaced

cl 4

Schedule 2 Levied items in respect of which rate of levy not to exceed $20 for each tonne

s 4

Tariff item numberStatistical key codeDescription of goods
72.08Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
Not in coils, not further worked than hot-rolled, with patterns in relief:
7208.40.10Of a width exceeding 1.95 m and of a thickness exceeding 4.75 mm
01F...Of a thickness of 4.75 mm or more but not exceeding 10 mm
09A...Of a thickness exceeding 10 mm
7208.40.90Other
01K...Of a thickness exceeding 10 mm
09E...Of a thickness of 4.75 mm or more but not exceeding 10 mm
Other, not in coils, not further worked than hot-rolled:
Of a thickness exceeding 10 mm:
7208.51.1000FRolled on four faces or in a closed box pass, of a width not exceeding 1,250 mm, without patterns in relief and having a minimum yield point of other than 355 MPa
Other:
7208.51.5000HOf a width exceeding 1.95 m
7208.51.9000KOther
Of a thickness of 4.75 mm or more but not exceeding 10 mm:
7208.52.1000LRolled on four faces or in a closed box pass, of a width not exceeding 1,250 mm, without patterns in relief and having a minimum yield point of other than 355 MPa
Other:
7208.52.5000BOf a width exceeding 1.95 m
7208.52.9000DOther
Other:
3 mm or more in thickness:
7208.90.02Of a width exceeding 1.95 m and of a thickness exceeding 4.75 mm
09G....Other
7208.90.05Other
....Other:
11H.....Exceeding 4.75 mm in thickness
72.10Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated:
7210.20.00Plated or coated with lead, including terne-plate
..Other:
11B...Exceeding 4.75 mm in thickness
Electrolytically plated or coated with zinc:
Exceeding 1.6 mm in thickness:
7210.30.20Other
01K....Exceeding 4.75 mm in thickness
Otherwise plated or coated with zinc:
Other:
Exceeding 1.9 mm in thickness:
7210.49.01Worked
01K.....Exceeding 4.75 mm in thickness, not in coils
Other:
7210.49.19Other
......Containing in the plating or coating, not less than 50% and not more than 80% zinc by weight, alloyed with aluminium:
.......Painted, laquered or similarly coated:
19J........Of a thickness of 4.75 mm or more
.......Plastic laminated:
29F........Of a thickness of 4.75 mm or more
.......Other:
39C........Of a thickness of 4.75 mm or more
......Containing in the plating or coating, more than 80% zinc by weight, alloyed with aluminium:
.......Painted, laquered or similarly coated:
49L........Of a thickness of 4.75 mm or more
.......Plastic laminated:
59H........Of a thickness of 4.75 mm or more
.......Other:
69E........Of a thickness of 4.75 mm or more
......Other:
.......Painted, laquered or similarly coated:
79B........Of a thickness of 4.75 mm or more
.......Other:
89K........Of a thickness of 4.75 mm or more
7210.50.00Plated or coated with chromium oxides or with chromium and chromium oxides
..Other:
11C...Exceeding 4.75 mm in thickness
Plated or coated with aluminium:
Plated or coated with aluminium-zinc alloys:
7210.61.10Containing, in the plating or coating, not less than 95% aluminium by weight
....Worked:
01K.....Exceeding 4.75 mm in thickness
....Other:
.....Other:
21D......Exceeding 4.75 mm in thickness
Other:
7210.61.20Worked
01E.....Exceeding 4.75 mm in thickness, not in coils
Other:
7210.61.90Other
01C......Exceeding 4.75 mm in thickness
Other:
7210.69.10Containing, in the plating or coating, not less than 95% aluminium by weight
....Worked:
01F.....Exceeding 4.75 mm in thickness
....Other:
.....Other:
21L......Exceeding 4.75 mm in thickness
Other:
7210.69.20Worked
01A.....Exceeding 4.75 mm in thickness, not in coils
Other:
7210.69.90Other
01K......Exceeding 4.75 mm in thickness
Painted, varnished or coated with plastics:
7210.70.01Worked
01K...Exceeding 4.75 mm in thickness, not in coils
Other:
7210.70.19Other
01F....Exceeding 4.75 mm in thickness
Other:
7210.90.01Worked
01G...Exceeding 4.75 mm in thickness, not in coils
Other:
7210.90.19Other
01C....Exceeding 4.75 mm in thickness
72.11Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated:
Not further worked than hot-rolled:
7211.13.00Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
05F...Over 500 mm in width, exceeding 4.75 mm in thickness
Other, of a thickness of 4.75 mm or more:
7211.14.90Other
01G....Over 500 mm in width
72.12Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated:
Electrolytically plated or coated with zinc:
Other:
Exceeding 1.6 mm in thickness:
7212.20.30Other
01H.....Exceeding 4.75 mm in thickness
Otherwise plated or coated with zinc:
Other:
Exceeding 1.9 mm in thickness:
7212.30.11Worked
01G.....Exceeding 4.75 mm in thickness, not in coils
7212.30.19Other
.....Other:
41G......Exceeding 4.75 mm in thickness, not in coils
Painted, varnished or coated with plastics:
Other:
7212.40.11Worked
01L....Exceeding 4.75 mm in thickness
7212.40.19Other
....Other:
11J.....Exceeding 4.75 mm in thickness
Otherwise plated or coated:
7212.50.18Other
...Other:
11F....Exceeding 4.75 mm in thickness
Clad:
7212.60.18Other
...Other:
11K....Exceeding 4.75 mm in thickness
72.16Angles, shapes and sections of iron or non-alloy steel:
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more:
U sections:
7216.31.0100L102 mm × 51 mm × 10.4 kg/m
7216.31.0900AOther
7216.32.00I sections:
01G...Less than 40 kg/m
09B...Other
7216.33.00H sections:
01A...Less than 40 kg/m
09G...Other
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
7216.40.0100KEqual angled L sections, 80 mm × 80 mm by 5 mm to 13 mm in thickness
7216.40.0900LOther
7216.50.00Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
..Of a height of 80 mm or more:
01E...Less than 40 kg/m
09L...Other
Angles, shapes and sections, not further worked than cold-formed or cold-finished:
7216.61.00Obtained from flat-rolled products
...Of a height of 80 mm or more:
01C....Angles and tees
05F....Channels, girders, beams and joists
09J....Other
7216.69.00Other
...Of a height of 80 mm or more:
01K....Angles and tees
05B....Channels, girders, beams and joists
09E....Other
Other:
7216.91.00Cold-formed or cold-finished from flat-rolled products
...Worked:
01D....Of a height of 80 mm or more
...Other:
....Of a height of 80 mm or more:
11A.....Galvanised
15D.....Other
7216.99.00Other
...Worked:
01L....Of a height of 80 mm or more
...Other:
....Of a height of 80 mm or more:
11H.....Galvanised
15L.....Other
72.25Flat-rolled products of other alloy steel, of a width of 600 mm or more:
Other, not further worked than hot rolled, not in coils:
7225.40.19Other
10B...Exceeding 4.75 mm in thickness
Other:
Electrolytically plated or coated with zinc:
7225.91.10Galvanised
....Other:
13B.....Exceeding 4.75 mm in thickness, not in coils
7225.91.90Other
....Other:
.....Worked:
21G......Exceeding 4.75 mm in thickness, not in coils
.....Other:
29B......Exceeding 4.75 mm in thickness, not in coils
Otherwise plated or coated with zinc:
7225.92.10Galvanised
....Other:
13G.....Exceeding 4.75 mm in thickness, not in coils
7225.92.90Other
....Other:
.....Worked:
21A......Exceeding 4.75 mm in thickness, not in coils
.....Other:
29G......Exceeding 4.75 mm in thickness, not in coils
Other:
7225.99.10Galvanised
....Other:
13J.....Exceeding 4.75 mm in thickness, not in coils
7225.99.90Other
....Other:
.....Worked:
21C......Exceeding 4.75 mm in thickness, not in coils
.....Other:
29J......Exceeding 4.75 mm in thickness, not in coils
72.26Flat-rolled products of other alloy steel, of a width of less than 600 mm:
Other:
7226.91.00Not further worked than hot-rolled
...Other:
11J....Over 500 mm in width, of a thickness exceeding 4.75 mm
Other:
7226.99.01Galvanised or worked
....Electrolytically plated or coated with zinc:
10C.....Over 500 mm in width, of a thickness exceeding 4.75 mm, not in coils
....Otherwise plated or coated with zinc:
15D.....Over 500 mm in width, of a thickness exceeding 4.75 mm, not in coils
....Other:
19G.....Over 500 mm in width, of a thickness exceeding 4.75 mm, not in coils
7226.99.18Other
....Electrolytically plated or coated with zinc:
.....Other:
13H......Over 500 mm in width, of a thickness exceeding 4.75 mm
....Otherwise plated or coated with zinc:
.....Other:
21J......Over 500 mm in width, of a thickness exceeding 4.75 mm
....Other:
.....Other:
33B......Over 500 mm in width, of a thickness exceeding 4.75 mm
72.28Other bars and rods of other alloy steel; angles shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel:
7228.70.00Angles shapes and sections
..Of a height of 80 mm or more:
01F...Channels, girders, beams and joists
09A...Other
73.06Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel:
Other, welded, of non-circular cross-section:
Of a square rectangular cross-section
...rectangular hollow section
7306.61.00....Of a maximum dimension of 102 mm or more but less than 128 mm:
.....Plated or coated with zinc:
63B......Of wall thickness not exceeding 2.6 mm
64L......Other
.....Plated or coated with other metals:
65J......Of wall thickness not exceeding 2.6 mm
66G......Other
.....Painted, lacquered or similarly coated:
67E......Of wall thickness not exceeding 2.6 mm
68C......Other
.....Other:
69A......Of wall thickness not exceeding 2.6 mm
70E......Other
....Of a maximum dimension of 128 mm or more but less than 229 mm:
.....Stainless steel:
71C......Of wall thickness not exceeding 2.6 mm
72A......Other
.....Plated or coated with zinc:
73K......Of wall thickness not exceeding 2.6 mm
74H......Other
.....Plated or coated with other metals:
75F......Of wall thickness not exceeding 2.6 mm
76D......Other
.....Painted, lacquered or similarly coated:
77B......Of wall thickness not exceeding 2.6 mm
78L......Other
.....Other:
79J......Of wall thickness not exceeding 2.6 mm
80B......Other
81L....Other

Schedule 3 Levied items in respect of which rate of levy not to exceed 10 cents for each kilogram

s 4

Tariff item numberStatistical key codeDescription of goods
71.06Silver (including silver plated with gold or platinum), unwrought or in semi-manufactured forms, or in powder form:
Other:
7106.92.00Semi-manufactured
...Other:
....Bars and rods, strip and wire:
11B.....Welding
72.15Other bars and rods of iron or non-alloy steel:
Other, not further worked than cold-formed or cold-finished:
Other:
7215.50.20Containing by weight less than 0.6% of carbon
....Containing by weight less than 0.25% of carbon:
.....Straightened wire not exceeding 13 mm in diameter:
01H......Welding wire
.....Other:
......Of circular cross-section:
21B.......Welding
......Other:
31K.......Welding
7215.90.00Other
..Other:
21F...Welding
72.17Wire of iron or non-alloy steel:
7217.10.00Not plated or coated, whether or not polished
..Containing by weight less than 0.25% of carbon:
...Welding wire
17E....Less than 0.9 mm in diameter
18C....0.9 mm or more, but less than 1.6 mm in diameter
19A....1.6 mm or more, but less than 2.5 mm in diameter
20E....2.5 mm or more, but less than 3.55 mm in diameter
21C....3.55 mm or more, but less than 4.5 mm in diameter
22A....4.5 mm or more, but less than 6 mm in diameter
23K....6 mm or more, but less than 7.5 mm in diameter
24H....7.5 mm or more, but less than 11.5 mm in diameter
25F....11.5 mm or more in diameter
7217.30.00Plated or coated with other base metals
..Containing by weight less than 0.25% of carbon:
...Less than 1.8 mm in any cross-sectional dimension:
01F....Welding
...Other:
11C....Welding
7217.90.00Other
..Containing by weight less than 0.25% of carbon:
...Less than 1.8 mm in any cross-sectional dimension:
01H....Welding
...Other:
11E....Welding
72.22Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
7222.30.00Other bars and rods
..Other:
11K...Welding
72.23
7223.00.00Wire of stainless steel
01K.Welding
72.28Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel:
7228.20.00Bars and rods, of silico-manganese steel
..Other:
...Wire rod:
12C....Welding
...Other:
21B....Welding
7228.60.00Other bars and rods
..Other:
11K...Welding
72.29Wire of other alloy steel:
7229.20.00Of silico-manganese steel
..Coated:
02D...Welding
..Other:
12A...Welding
7229.90.00Other
..Other:
...Coated:
15A....Welding
...Other:
21F....Welding
74.07Copper bars, rods and profiles:
Of refined copper:
Bars and rods:
7407.10.01Wire rod
01L....Welding
7407.10.09Other
01A....Welding
Of copper alloys:
Of copper-zinc base alloys (brass):
7407.21.01Bars and rods
01J....Welding
Other:
7407.29.01Bars and rods
....Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver):
10D.....Welding
....Other:
17A.....Welding
74.08Copper wire:
Of refined copper:
7408.19.00Other
01C...Welding
Of copper alloys:
7408.21.00Of copper-zinc base alloys (brass)
01L...Welding
7408.22.00Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
01E...Welding
7408.29.00Other
01G...Welding
76.01Unwrought aluminium:
Aluminium, not alloyed:
7601.10.01Bars and rods:
01D...Welding
Aluminium alloys:
7601.20.01Bars and rod
01H...Welding
76.04Aluminium bars, rods and profiles:
7604.10.00Of aluminium, not alloyed
01B..Welding
Of aluminium alloys:
Other:
7604.29.01Bars and rods
01C....Welding
76.05Aluminium wire:
Of aluminium, not alloyed:
7605.19.00Other
01A...Welding
Of aluminium alloys:
7605.29.00Other
01E...Welding
83.11Wire, rods, tubes, plates, electrodes and similar products, of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying:
8311.10.0000CCoated electrodes of base metal, for electric arc-welding
8311.20.0000GCored wire of base metal, for electric arc-welding
8311.30.0000LCoated rods and cored wire, of base metal, for soldering, brazing or welding by flame
Other:
8311.90.0100JWire and rods, of agglomerated base metal powder, used for metal spraying
8311.90.0900KOther

Michael Webster,
Clerk of the Executive Council.

Explanatory note

This note is not part of the order, but is intended to indicate its general effect.

This order, which comes into force on 26 August 2021, replaces Schedules 2 and 3 of the Heavy Engineering Research Levy Act 1978 to reflect the tariff item numbers, statistical key codes, and descriptions of goods used in the Working Tariff Document prepared by the New Zealand Customs Service.

Issued under the authority of the Legislation Act 2012.

Date of notification in Gazette: 8 July 2021.

This order is administered by the Ministry of Business, Innovation, and Employment.