Building (Product Certification) Regulations 2022
Checking for alerts... Loading...
Version as at 8 August 2025
Building (Product Certification) Regulations 2022
(SL 2022/172)
Rt Hon Dame Helen Winkelmann, Administrator of the Government
Order in Council
At Wellington this 7th day of June 2022
Present:
Her Excellency the Administrator of the Government in Council
Note
The Parliamentary Counsel Office has made editorial and format changes to this version using the powers under subpart 2 of Part 3 of the Legislation Act 2019.
Note 4 at the end of this version provides a list of the amendments included in it.
These regulations are administered by the Ministry of Business, Innovation, and Employment.
These regulations are made under section 402(1) of the Building Act 2004 on the advice and with the consent of the Executive Council and on the recommendation of the Minister for Building and Construction.
Contents
Regulations
1 Title
These regulations are the Building (Product Certification) Regulations 2022.
2 Commencement
These regulations come into force on 7 September 2022.
3 Interpretation
In these regulations, unless the context otherwise requires,—
Act means the Building Act 2004
building code means the building code set out in Schedule 1 of the Building Regulations 1992
certificate holder, in relation to a building product or a building method, means the proprietor of the building product or building method to whom, and in respect of which, a product certificate is issued
evaluation plan has the meaning set out in regulation 6(4)
policies, procedures, and systems, in relation to a person, means policies, procedures, and systems that relate to the person’s ability to perform the functions of a product certification body under subpart 7 of Part 3 of the Act competently, impartially, consistently, transparently, and accountably
product certification criteria has the meaning set out in regulation 6(4)
quality plan, in relation to a building product or building method, means the quality plan submitted under regulation 13 in relation to the building product or building method.
4 Transitional, savings, and related provisions
The transitional, savings, and related provisions set out in Schedule 1 have effect according to their terms.
Part 1 Product certification scheme set out in sections 261 to 272H of Act
Part 1 heading: inserted, on 8 August 2025, by regulation 4 of the Building (Product Certification) Amendment Regulations 2025 (SL 2025/168).
Criteria and standards for accreditation as product certification body
5 Requirements for policies, procedures, and systems
To meet the criteria and standards for accreditation as a product certification body required by section 263(1)(b) of the Act, the policies, procedures, and systems that a person has in place—
(a)
must include policies, procedures, and systems that comply with regulation 6; and
(b)
must meet the other requirements in regulation 7.
6 Conformity assessment
(1)
For the purposes of regulation 5(a), a person’s policies, procedures, and systems must address conformity assessment.
(2)
Conformity assessment, in relation to a person, means how the person will—
(a)
assess whether a building product or building method meets the product certification criteria; and
(b)
provide assurance that the building products and building methods that the person certifies meet, and continue to meet, the product certification criteria.
(3)
A person’s policies, procedures, and systems addressing conformity assessment must include—
Organisational and management systems
(a)
organisational and management systems that support the person’s ability to perform the functions of a registered PCB under the Act competently, impartially, consistently, transparently, and accountably; and
Certification of building products and building methods
(b)
the process to be carried out before any building product or building method is certified, which must include—
(i)
identifying the evaluation requirements for the building product or building method; and
(ii)
assessing the quality plan submitted, in accordance with regulation 13, with the application for a product certificate; and
(iii)
carrying out risk assessments of the building product or building method; and
(iv)
producing an evaluation plan; and
(v)
producing a report of the evaluation; and
Acceptance of test reports and technical opinions
(c)
requirements for accepting test reports and technical opinions (for example, minimum requirements that relate to testing facilities).
(4)
In these regulations,—
evaluation plan, in relation to a building product or building method, means a plan that sets out—
(a)
what is to be certified (including scope and limitations of use); and
(b)
the means by which it will be demonstrated that the building product or building method meets the product certification criteria; and
(c)
the timing and method of the audits and inspections to be carried out to ensure that the building product or building method continues to meet the product certification criteria
product certification criteria, in relation to a building product or building method, means—
(a)
the criteria and standards for certification prescribed by regulation 12(1) that relate to that building product or building method; and
(b)
any product certification scheme rules, made under section 272E(3) of the Act to supplement regulation 12(1), that relate to that building product or building method.
7 Other requirements for policies, procedures, and systems
(1)
For the purposes of regulation 5(b), a person’s policies, procedures, and systems must—
Scope of accreditation as product certification body
(a)
be designed to ensure that the only product certification activities that the person carries out are activities that are within the scope of their accreditation; and
Employees and contractors
(b)
be designed to ensure—
(i)
that the person has enough employees and contractors to perform the person’s product certification functions; and
(ii)
that every individual who is allocated or carries out product certification work on the person’s behalf is competent to do that work; and
Written records
(c)
require the making, and keeping, of appropriate written records; and
Disputes and complaints
(d)
include processes for receiving and handling disputes and complaints in an appropriate manner; and
Comply with scheme rules
(e)
be consistent with the relevant product certification scheme rules.
(2)
In this regulation, relevant product certification scheme rules means the product certification scheme rules made under section 272E of the Act (if any) that supplement any provisions of this regulation and regulations 5 and 6.
(3)
In relation to written records, see subpart 3 of Part 4 of the Contract and Commercial Law Act 2017 (which contains provisions relating to, for example, the making of written records in electronic form).
Criteria and standards for registration of product certification body
8 Criteria and standards for registration
To meet the criteria and standards for registration required by section 267A(1)(c) of the Act, an accredited PCB must be a fit and proper person to be registered as a product certification body, by reference to the following attributes:
(a)
their character and integrity:
(b)
their likely ability to maintain an appropriate degree of impartiality and independence in relation to their functions as a registered PCB:
(c)
their reputation for professional conduct:
(d)
their likely ability to conduct business in a responsible and ethical manner.
9 Application for registration
An application for registration as a product certification body must include the following information:
(a)
details of the applicant, including—
(i)
their full legal name; and
(ii)
the physical address of their principal place of business; and
(iii)
their postal address (if different from their physical address); and
(iv)
their other contact details, including their email address and phone number; and
(v)
the address of their Internet site; and
(b)
details of the individual responsible for the application, including—
(i)
their full name; and
(ii)
their title or role (in relation to the applicant); and
(iii)
their contact details, including their email address and phone number; and
(c)
evidence that the applicant is an accredited PCB; and
(d)
information relevant to the chief executive’s assessment as to whether the applicant meets the requirement to be a fit and proper person to be registered as a product certification body, including—
(i)
the information required by regulation 10; and
(ii)
the information relating to conflicts of interest required by regulation 11.
10 Information required under regulation 9(d)(i)
(1)
This regulation sets out the information that an applicant for registration as a product certification body must include in their application for the purposes of regulation 9(d)(i).
(2)
The information in subclause (3) must be provided for each of the following persons:
(a)
the applicant; and
(b)
the individual responsible for the application; and
(c)
every individual responsible for the day-to-day management or control of any of the applicant’s functions as a registered PCB.
(3)
The information is—
(a)
whether, in New Zealand or overseas,—
(i)
any civil claim has been brought or filed against the person in relation to contract or tort and, if so, details of that claim; or
(ii)
the person has been convicted of any offence, or there are pending proceedings for any offence, that the chief executive considers relevant to the chief executive’s assessment of whether the applicant is a fit and proper person, including (without limitation)—
(A)
details of any offence involving dishonesty, fraud, or misrepresentation or any offence under any legislation relating to the building sector; or
(B)
details of the conviction or pending proceedings; or
(iii)
the person has been the subject of any complaint made to, investigation conducted by, or disciplinary action imposed by any person (including any department) acting as regulator, or responsible for administering discipline, under legislation relating to a similar scheme and, if so, details of the complaint, investigation, or disciplinary action; or
(iv)
the person has been refused accreditation in relation to a similar scheme and, if so, details of that refusal; and
(b)
whether the person has any relevant experience (including any experience with similar schemes) and, if so, details of that experience; and
(c)
details of the person’s knowledge, or access to knowledge, of legislation and other regulatory requirements relating to the New Zealand building industry; and
(d)
if the person is an individual, details of—
(i)
any relevant past and current employment; and
(ii)
any relevant qualifications; and
(iii)
any relevant past and current professional body memberships; and
(iv)
any past and current directorships and senior management roles; and
(e)
details of the person’s financial management history, including—
(i)
whether the person has been declared bankrupt or put into liquidation, or had a receiver appointed in relation to any of their assets; and
(ii)
if the person is an individual, whether they were involved in the management or control of an entity at a time when that entity was put into liquidation or had a receiver appointed in relation to any of its assets.
(4)
The information required under subclause (3)(a) does not include details that are suppressed by court order or under legislation.
(5)
The information required under subclause (3)(d)(i), (iii), and (iv) that is past information is required only in respect of the 10-year period before the application is made.
(6)
For the purposes of this regulation,—
similar scheme means a scheme in respect of which a person is responsible for assessing whether, and providing assurance to users that, a product, process, or service meets required criteria or standards
users, in the definition of similar scheme, means users of a product, process, or service assessed by the person referred to in that definition as meeting the required criteria or standards.
11 Information relating to conflicts of interest
(1)
An applicant for registration as a product certification body must include in their application, for the purposes of regulation 9(d)(ii),—
(a)
confirmation that there are no current or reasonably foreseeable relevant conflicts of interest; or
(b)
details of all relevant conflicts of interest that are either current or reasonably foreseeable, and confirmation that the applicant has written procedures for transparently and appropriately managing those conflicts of interest.
(2)
In this clause, relevant conflicts of interest, in relation to an applicant, means—
(a)
conflicts between—
(i)
the applicant’s interests that relate to the applicant’s product certification activities; and
(ii)
the applicant’s other interests; and
(b)
conflicts between—
(i)
the applicant’s interests that relate to the applicant’s product certification activities; and
(ii)
the interests of any of the persons referred to in regulation 10(2)(b) and (c).
Criteria and standards for certification of building products and building methods
12 Criteria and standards for certification
(1)
To meet the criteria and standards for certification required by section 269(1)(a) of the Act, a building product or building method—
(a)
must comply with—
(i)
clause B2 (durability) of the building code; and
(ii)
the provisions of clauses F1 to F9 (safety of users) of the building code that are relevant to the intended use of the building product or building method; and
(iii)
all other provisions of the building code that are relevant to the intended use; and
(b)
must be under the effective control of the person—
(i)
who is, or has applied to be, the certificate holder in respect of the building product or building method; and
(ii)
who complies with regulation 13 and, if applicable, regulation 14.
(2)
See also section 269(1)(b) of the Act (which relates to compliance with supplementary scheme rules).
13 Quality plan for building product or building method sought to be certified
(1)
An applicant for a product certificate must submit with the application a quality plan prepared in respect of the building product or building method sought to be certified.
(2)
The quality plan must—
(a)
specify the procedures to be followed in respect of the building product or building method and the resources to be applied; and
(b)
specify the persons responsible for following those procedures and applying those resources; and
(c)
be consistent with any product certification scheme rules, made under section 272E of the Act to supplement this regulation or regulation 12(1), that relate to the building product or building method.
(3)
The applicant must provide an assurance that the building product or building method to be certified is in accordance with the quality plan.
14 Supply of samples
An applicant for a product certificate in relation to a building product or building method that is a tangible product must, if requested by the registered PCB, submit with the application a sample or samples that are an accurate representation of the product.
Content and annual review of product certificates
15 Content of product certificates
(1)
For the purposes of section 272A(1)(a)(ii) of the Act, a product certificate must include all the information referred to in Schedule 2.
(2)
If the product certificate relates to both a building product and a building method that are to be used together, the information must be given in respect of both the building product and the building method.
(3)
The information must—
(a)
be written in plain English; and
(b)
not be too lengthy, detailed, specific, technical, or complex; but
(c)
be detailed enough to enable users of the product certificate to understand how the certified building product or building method will perform in relation to its intended use.
16 Annual review of product certificates
(1)
For the purposes of section 270(5)(a) of the Act, in carrying out an audit for the purposes of reviewing a product certificate under section 270(1) or (3) of the Act, the registered PCB must take into account the following matters:
(a)
any changes to the building product or building method, including (in the case of a building product) any changes to raw materials used to produce the product; and
(b)
any changes in the ownership or control of the manufacturer of the building product or building method; and
(c)
any changes in the ownership or control of the proprietor of the building product or building method; and
(d)
any changes in any technical documents that relate to the design, installation, use, or maintenance of the building product or building method and that were relied on as part of the assessment for certification of the building product or building method under section 269 of the Act; and
(e)
any of the following of which the PCB is aware in relation to the building product or building method:
(i)
non-conformance with the product certification criteria:
(ii)
non-conformance with the quality plan; and
(f)
any complaints of which the PCB is aware in relation to the building product or building method; and
(g)
any information that the PCB has that may adversely affect the continued reliability of any test reports or technical opinions that formed part of the assessment for certification of the building product or building method (which may, for example, include new information about the test methodology, test facility, or provider of the technical opinion); and
(h)
any changes to regulations 12 to 14 (which relate to the criteria and standards for certification) or to the provisions of the building code referred to in regulation 12(1); and
(i)
any changes to the provisions of the building code that are referenced on the product certificate; and
(j)
any changes to acceptable solutions, verification methods, any standard (within the meaning of section 4(1) of the Standards and Accreditation Act 2015), or other means of compliance that relate to the performance requirements of the building code and intended use of the building product or building method; and
(k)
the matters in subclause (3), if that subclause applies.
(2)
Subclause (3) applies if, in the course of conducting the audit, the registered PCB becomes aware of a matter that suggests that there may be grounds to suspend or revoke the product certificate under section 271 of the Act.
(3)
If this subclause applies, the PCB must also take into account—
(a)
any information that the PCB has that may adversely affect the continued reliability of the evaluation plan produced before certification of the building product or building method; and
(b)
any information that the PCB has that may adversely affect the continued reliability of the risk assessments carried out before certification in relation to the building product or building method; and
(c)
any information that the PCB has that may adversely affect the continued reliability of the quality plan; and
(d)
any information that the PCB has that may adversely affect the reliability of any technical documents relied on as part of the assessment for certification of the building product or building method and that relate to its design, installation, use, or maintenance.
Fees
17 Fees
(1)
The fees set out in Schedule 3 are payable in respect of the matters to which they relate.
(2)
The fees are exclusive of goods and services tax.
Part 2 Overseas product certification schemes, etc: sections 272HA to 272HC of Act
Part 2: inserted, on 8 August 2025, by regulation 5 of the Building (Product Certification) Amendment Regulations 2025 (SL 2025/168).
Recognition of building products or building methods certified under overseas product certification scheme
Heading: inserted, on 8 August 2025, by regulation 5 of the Building (Product Certification) Amendment Regulations 2025 (SL 2025/168).
18 Criteria that chief executive must be satisfied are met
(1)
For the purposes of section 272HA(2)(a) of the Act, the prescribed criteria that the chief executive must be satisfied the building products or building methods meet are as follows:
(a)
the products or methods are certified under the overseas product certification scheme by a person other than a person whose accreditation as a product certification body is suspended or revoked under section 264 of the Act:
(b)
the products or methods are supported by a certificate that—
(i)
is issued under the overseas product certification scheme and has not expired or been withdrawn; and
(ii)
is equivalent to a product certificate; and
(iii)
is available for persons using the products or methods in New Zealand (New Zealand users); and
(iv)
is in English or accurately translated into, and available for New Zealand users, in English:
(c)
the products or methods are supported by any other information (if necessary in addition to the certificate referred to in paragraph (b)) that is sufficient to enable New Zealand users to understand how to use them and how they will perform for the purposes of the intended use:
(d)
there is sufficient evidence to establish that the products or methods would comply with the building code if—
(i)
the chief executive were to recognise the products or methods under section 272HA(1) of the Act; and
(ii)
a person using the products or methods were to comply with every relevant limitation or condition that the chief executive proposes to impose on the recognition; and
(iii)
the person were to use the products or methods for an intended use identified in a certificate referred to in paragraph (b) (or in other information available to the chief executive) and specified in a limitation or condition that the chief executive proposes to impose on the recognition (other than any use that is excluded by any such limitation or condition):
(e)
no warning about or ban on any of the products or methods is in force under section 26 of the Act:
(f)
no equivalent outside New Zealand to a warning or ban under section 26 of the Act applies to any of the products or methods.
(2)
For the purposes of section 272HA(2)(b) of the Act, the prescribed criterion that the chief executive must be satisfied the overseas product certification scheme meets is that, under the scheme, any organisation that is responsible for certifying the building products or building methods concerned has the relevant features.
(3)
The relevant features are that the organisation—
(a)
has been accredited as meeting appropriate standards by an accreditation body that is independent of that organisation; and
(b)
has robust processes for each of the following:
(i)
evaluating and certifying the building products or building methods:
(ii)
monitoring and evaluating those certifications on an ongoing basis:
(iii)
ensuring that certifiers of the building products or building methods act impartially in certifying those products or methods:
(iv)
ensuring that certifiers of building products act independently from manufacturers and suppliers of those products and independently from each other:
(v)
ensuring that persons who manage or control the organisation carry out that role with integrity and professionalism.
Regulation 18: replaced, on 8 August 2025, by regulation 5 of the Building (Product Certification) Amendment Regulations 2025 (SL 2025/168).
Recognition of standards issued by overseas standards organisations, and standards certification schemes
Heading: inserted, on 8 August 2025, by regulation 5 of the Building (Product Certification) Amendment Regulations 2025 (SL 2025/168).
19 Criteria that Minister must be satisfied are met
Recognition of groups of standards issued by overseas standards organisations
(1)
For the purposes of section 272HB(2)(a) of the Act, the prescribed criteria that the Minister must be satisfied the groups of standards or the part concerned meets are as follows:
(a)
the groups of standards or the part concerned is available, or can be made available, to users in New Zealand:
(b)
the groups of standards or the part concerned—
(i)
is in English; or
(ii)
is accurately translated into, and published by the overseas standards organisation in, English.
(2)
For the purposes of section 272HB(2)(b) of the Act, the prescribed criterion that the Minister must be satisfied the overseas standards organisation meets is that—
(a)
the overseas standards organisation—
(i)
is the International Organization for Standardization; or
(ii)
is the International Electrotechnical Commission; or
(iii)
is a full member of the International Organization for Standardization or of the International Electrotechnical Commission; or
(b)
the overseas standards organisation has robust and transparent processes for developing, maintaining, and publishing standards, and those processes are consistent with internationally recognised good practice relating to standards and include the following:
(i)
processes for ensuring that standards issued by the overseas standards organisation are informed by technical expertise and appropriate consultation with the industry concerned and consumers:
(ii)
processes for ensuring that any persons and organisations engaged in developing standards issued by the overseas standards organisation act impartially and independently:
(iii)
processes for ensuring that standards issued by the overseas standards organisation are reviewed, and updated as necessary, at appropriate and regular intervals.
Recognition of standards certification schemes
(3)
For the purposes of section 272HB(3)(b) of the Act, the prescribed criteria that the Minister must be satisfied the standards certification organisation meets are as follows (but only if the organisation is responsible under the standards certification scheme concerned for assessing building products against standards):
(a)
the standards certification organisation has been accredited as meeting appropriate standards by an accreditation body that is independent of the standards certification organisation:
(b)
the standards certification organisation has robust processes for each of the following:
(i)
assessing whether the building products meet those standards:
(ii)
monitoring and evaluating those assessments on an ongoing basis:
(iii)
ensuring that persons assessing the building products act impartially:
(iv)
ensuring that persons assessing the building products act independently from manufacturers and suppliers of those building products and independently from each other:
(v)
ensuring that any persons who manage or control the organisation carry out that role with integrity and professionalism.
Regulation 19: inserted, on 8 August 2025, by regulation 5 of the Building (Product Certification) Amendment Regulations 2025 (SL 2025/168).
Schedule 1 Transitional, savings, and related provisions
Part 1 Provisions relating to these regulations as made
1 Application for accreditation as product certification body made before 7 September 2022 but not decided before that date
(1)
This clause applies to an application for accreditation as a product certification body if the application is made before 7 September 2022 but has not been decided before that date.
(2)
The criteria and standards in regulations 5 to 7 apply for the purposes of deciding that application.
2 Fees for audits of accredited PCBs commencing before 7 September 2022 but not complete before that date
(1)
This clause applies to an audit of an accredited PCB that has commenced before 7 September 2022 but is not complete before that date.
(2)
The fees that applied under the Building (Product Certification) Regulations 2008 (before their revocation by these regulations) continue to apply in relation to the audit to the extent of—
(a)
work done, and disbursements incurred, before 7 September 2022; and
(b)
audit meetings cancelled before 7 September 2022.
(3)
The fees in items 5 and 6 of the table in Part 1 of Schedule 3 of these regulations apply in relation to the audit to the extent that the work is done, and disbursements incurred, on and from 7 September 2022.
Schedule 2 Content of product certificates
In accordance with regulation 15, a product certificate must include the following information:
General
(a)
the original date of issue:
(b)
the certificate number:
(c)
the version number:
(d)
the date of last review (if any):
Certificate holder
(e)
the following information about the certificate holder:
(i)
their legal name:
(ii)
their trading name or trading names:
(iii)
their address for service:
(iv)
their email address and phone number:
(v)
their Internet site:
Product certification body
(f)
the following information about the registered PCB for the product certificate:
(i)
their legal name:
(ii)
their trading name, or trading names, in New Zealand:
(iii)
their address for service in New Zealand:
(iv)
their email address and phone number in New Zealand:
(v)
their Internet site:
(vi)
an Internet link to the publicly available information on the registered PCB’s complaint process:
Building product or building method
(g)
a description of the building product or building method that includes the following:
(i)
the name or names of the building product or building method in New Zealand (including the brand or brands used for marketing):
(ii)
the building method’s or building product’s catalogue or model identification number or numbers or other unique identifiers that might be used to identify the building product or building method:
(iii)
in the case of a building product or building method that is a tangible product, the product’s physical attributes:
Intended use
(h)
a description of the intended use of the building product or building method that includes the following:
(i)
the intended use of the building product or building method as described in the building product’s or building method’s manual and other instructional materials:
(ii)
a statement of the function or purpose of the building product or building method:
Building code
(i)
a list of the clauses of the building code with which the building product or building method complies:
(j)
a statement specifying how the building product or building method specifically contributes to compliance with the building code when used as part of a system (if applicable):
Conditions and limitations of use
(k)
a list of any conditions or limitations of conformity for each performance requirement in the building code that the building product or building method is compliant with, including any—
(i)
qualifications on the extent of compliance (including where the building product or building method must be used as part of a system):
(ii)
requirements for the building product’s or building method’s use to be in accordance with the installation instructions and requirements against which the building product or building method was assessed:
(iii)
requirements for people with the qualifications and skills to install or use the building product or building method (other than requirements set by other laws):
(iv)
known or demonstrated circumstances where the building product or building method should not be used:
(l)
a statement as to whether there are any matters that should be taken into account in the use or application of the building product or building method and, if so, what those matters are:
Health and safety information
(m)
any health and safety information necessary to ensure that the relevant performance requirements in clauses F1 to F9 of the building code are met:
Signatures
(n)
the signatures of the following persons:
(i)
the product certification body’s authorised representative:
(ii)
the person or persons assigned by the product certification body to make the certification decision in accordance with the product certification body’s policies, procedures, and systems referred to in regulation 6 (which relates to conformity assessment):
Basis for certification
(o)
1 or more statements as to how the performance requirements in the building code are met:
References to supporting documentation for certification
(p)
a list of any acceptable solutions, verification methods, standard (within the meaning of section 4(1) of the Standards and Accreditation Act 2015), or other means of compliance listed against each individual performance requirement the building product or building method is compliant with, and their specific version and date:
(q)
a list of any documents describing tests and evaluations, including their full and correct title, specific version, and date, as relevant to the building product’s or building method’s certification:
(r)
a list of any other documents relied on for certification, or used to prove compliance, including their full title, specific version, and date.
Schedule 3 Fees
Part 1 Product certification body
| Activity | Matter | Fee | ||||
|---|---|---|---|---|---|---|
| Accreditation of product certification body | 1 | Application for accreditation as product certification body | $8,600 | |||
| 2 | Any additional time required after first 2 days to assess application for accreditation | $2,000 per day, or part of day, per assessor or technical expert | ||||
| 3 | Expenses incurred as part of accreditation activities under items 1 and 2 | Amount of reasonable expenses incurred | ||||
| Registration of product certification body | 4 | Application for registration as product certification body | $90.15 per hour up to $1,803 | |||
| Audit of accredited PCB | 5 | Audit of accredited PCB under section 262(1)(a) of the Act | $2,000 per day, or part of day, per assessor or technical expert | |||
| 6 | Expenses incurred as part of audit activities under item 5 | Amount of reasonable expenses incurred | ||||
Part 2 Proprietor of building product or building method
| Activity | Matter | Fee | |||
|---|---|---|---|---|---|
| Registration of product certificate | Application for registration | $180.30 | |||
Michael Webster,
Clerk of the Executive Council.
Date of notification in Gazette: 9 June 2022.
Notes
1 General
This is a consolidation of the Building (Product Certification) Regulations 2022 that incorporates the amendments made to the legislation so that it shows the law as at its stated date.
2 Legal status
A consolidation is taken to correctly state, as at its stated date, the law enacted or made by the legislation consolidated and by the amendments. This presumption applies unless the contrary is shown.
Section 78 of the Legislation Act 2019 provides that this consolidation, published as an electronic version, is an official version. A printed version of legislation that is produced directly from this official electronic version is also an official version.
3 Editorial and format changes
The Parliamentary Counsel Office makes editorial and format changes to consolidations using the powers under subpart 2 of Part 3 of the Legislation Act 2019. See also PCO editorial conventions for consolidations.
4 Amendments incorporated in this consolidation
Building (Product Certification) Amendment Regulations 2025 (SL 2025/168)
Versions
Building (Product Certification) Regulations 2022
RSS feed link copied, you can now paste this link into your feed reader.